You drove under a “brick” into the territory of a gas station - deprivation of rights or a fine. Basic requirements for gas stations Road signs gas station

– supplier of a wide range of information signs, plates for fuel tankers, gas tankers.

Transportation of dangerous goods using appropriate special equipment is regulated by established international safety standards and regulations. To coordinate this type of activity in different countries A common set of rules, the European Agreement concerning the International Carriage of Dangerous Goods by Road, was developed. Countries that are directly involved in the ADR agreement on the transport of dangerous goods undertake to comply with these rules in the territory of their country and the participating countries.

ADR regulates the requirements for certification, labeling, classification and packaging of dangerous goods. Of key importance is equipping the vehicle (gas tanker, fuel tanker) carrying such cargo with appropriate information signs signaling this fact to other road users.

The AZS Market company offers everything necessary for the external design of a fuel tanker: reflective tape, stickers, “Dangerous Goods” signs, ADR information signs, flashing beacons, fire extinguisher cases, etc.

Dangerous goods plate ADR

To recognize tank trucks transporting liquid motor fuel, propane-butane, special marking is used. Based on the current rules, special equipment transporting dangerous goods is equipped with a “dangerous goods” sign on the front and back, made on an orange background.

The information plate for displaying dangerous goods has dimensions of 0.3m x 0.4m and a black border of 0.015m.

You can buy ADR signs in our online store or by calling the numbers listed in the “Contacts” section.

Danger information signs ADR

Transportation of fuel by tank trucks, tank containers and multi-part gas containers is carried out using a danger sign measuring 0.250m x 0.250m, made in the shape of a rhombus. This sign is placed on the sides of the transported container and on its rear surface. In the case of transportation of dangerous goods by means of a multi-section tank, the required sign is installed on the sections on both sides, and a similar sign is placed on the rear end part.

Additionally, signs informing about the danger to the external environment are used, which are also installed on the sides and back of tanks, and on the ends and sides of containers. Such substances should be considered liquid or solid substances that poison water.

Marking of goods dangerous for environment, does not apply in cases where the volume of the substance is no more than 5 liters/kg.

The AZS Market company offers information signs, fuel truck danger signs, gas carrier danger signs, made of high-quality material and designed in strict accordance with current standards.

The Occupational Safety and Health Store Protectorshop in Moscow offers you the opportunity to easily and comfortably purchase Gas Station Safety Signs or other occupational safety products.

To place an order, use the methods below:

• Find and add the desired product to your cart by determining the required number of product items.
• Place your order by email. This type of order is perfect for a ready-made list of occupational health and safety products. In addition, if you require a personal order for the production of such goods as Gas Station Safety Signs or other occupational health and safety products, it is better to use an order by email.

Important!
Clearly indicate your contact information so that our store managers can immediately contact you to clarify all the details of the order and delivery.

Please take into account that our labor protection store in Moscow has the ability to fulfill your order for the purchase or individual production of almost any labor protection product.

Delivery of occupational health and safety products, including gas station safety signs, is carried out to the city of Moscow by various transport companies, at the buyer’s own choice, from a production warehouse located in Moscow.

Delivery will need to be paid because it is not included in the price of the goods, but still, according to your preference, the managers of the Occupational Safety and Health Store Protectorshop can make delivery included in the cost of the invoice for payment of the order, or provide a separate invoice for delivery to the city of Moscow.

If you order goods worth more than 26,000 rubles, then our labor protection store will be able to provide absolutely free delivery to your destination in Moscow in the MKAD area or to the office of a company located within the MKAD.

Manufacturers of occupational health and safety products presented in the store pay great attention to the quality of the products they produce.

Our store in its catalog presents an assortment of products only from the best manufacturers - this is the main requirement of our store.

We have extensive experience working with leading manufacturers of high-quality products in the field of occupational health and safety. For example, gas station safety signs from leading product manufacturers.

Be sure that the labor safety goods store offers you products only from the best manufacturers, the highest quality of service and an affordable price.

All this will help you communicate safety regulations to your employees and ensure compliance with safety rules in different areas of work.

Manufacturers supplying safety and health products for our store in Moscow are understanding and respect our desire to please even the most demanding customer.

Complete any, even one of the most complex and bizarre tasks. And yet provide the client with high-quality and unique products, which you can easily find on the website of our store.

Over the entire existence of our store, we have collected for you some of the best product offers..

Such as Gas Station Safety Signs, which are supplied to us by reliable and high-quality manufacturers.

We can confidently say that the products we provide will please you and meet the price-quality ratio.

Occupational safety and health is an important aspect of work. This area is a summary of generally accepted standards established and approved at the state level. Taking advantage official rules, persons providing work will be able to provide the labor process, and, accordingly, the employee himself, with complete protection from accidents. In order to achieve the set objectives, the employer carries out measures of a different nature: legal, rehabilitation, sanitary and hygienic and others.

Rules and regulations that must be truly met safe conditions labor are determined by state requirements, which are prescribed by the legislation of the Russian Federation. Control over the implementation of norms is also ensured at the official level.

The employer is the main person who is responsible for compliance with all norms prescribed by law. Fulfilling the assigned obligations, the person providing the workplace carries out active and passive activities (lectures, conversations, the use of notifications using memos, posters) aimed at familiarizing employees with the rules of behavior in atypical situations and preventing the occurrence of traumatic circumstances in the workplace.

At the same time, responsibility for the implementation of generally accepted standards also rests with the employees of the enterprise. Every worker at the enterprise is required to follow the rules aimed at ensuring their own safety, as well as acquire the minimum knowledge of occupational safety necessary to take measures in emergency situations.

Products necessary to provide employees with the required information can be offered by the Occupational Safety and Health Store Protectorshop in Moscow. You can get an idea of ​​the full list of products by looking at the categories in which posters, stands, magazines, gas station safety signs and many products are located.

Improving working conditions at an enterprise does not mean that less attention has been paid to labor protection. As before, the main human values human life and health continue to remain. The list of measures aimed at providing employees with full protection in the process of performing production tasks also remains unchanged.

Responsibility for ensuring working conditions with the proper degree of safety lies with the person who provided the work. If the employer fails to fulfill its obligations, it may be subject to various types of liability: a fine or criminal prosecution.

How to ensure employee safety?

In order to actively notify employees, employers conduct a variety of activities to achieve the desired result: conversations, lectures, briefings. In addition, it is also necessary to passively inform employees, for the organization of which posters, memos, stands and other products necessary to place information before the eyes of employees are used.

To carry out the above activities, various means and tools are used that are available at the Protectorshop Occupational Safety and Health Store in Moscow.

You can order the required types of goods by contacting a store representative.

To resolve the situation in the field of labor protection (OHS) at all Russian enterprises, there is a basic document -. The contents of this paper contain all the employer’s obligations to subordinates, whose main task is to ensure maximum safety in the labor process.

If the person providing the jobs fails to fulfill its obligations, tragic cases may arise, due to which the employer may be held accountable and punished. In such a situation, the type of punishment will be determined by the severity of the injuries that the employee received while fulfilling his official obligations. As a result, the person who provided the jobs may be subject to disciplinary, administrative, civil and other types of liability. All possible types of punishment are spelled out in.

In addition, subordinates may also be held liable for failure to comply with obligations. In this case, the role of the base document will be played by , . The severity of the punishment will depend on the extent of the violation. Thus, an employee who violates the rules may be reprimanded, but may also be subject to demotion or complete dismissal.

In order to avoid unpleasant surprises in the form of fines and other penalties, it is recommended to regularly conduct active informing of employees (lectures, conversations and safety briefings), as well as passive information, during which posters, tables, memos, indexes and other types of products can be used, purchase which are available at a good price at the Occupational Safety and Health Store Protectorshop in Moscow.

You can get acquainted with the full range of products by viewing such product categories as: safety signs, Gas station safety signs, magazines, evacuation plans and others.

Signs are used to inform traffic participants about relevant objects. Signs are installed at objects.

Preliminary service signs outside populated areas are installed 400-800 m, and, if necessary, 15-20 km and 60-80 km before the object, at turning points to them (intersections), if they are located away from the road. Preliminary service signs indicate the distance to the object. When indicating distances on preliminary service signs informing about objects located away from the road and installed 15-20 km, 60-80 km away, it is necessary to take into account the distance from the turn point (intersection) to the object.

Preliminary service signs in populated areas can be installed 100-150 m before the object and at the turning points closest to it (intersections). When placed on service signs additional information(addresses, telephone numbers, types of services provided, etc.) the distance to the facility, operating hours are indicated on additional information signs.

The signs are made of galvanized metal 0.8-1 mm thick, with double flanging, which provides additional rigidity to the sign body. Each sign has two attachment points in the form of “tongues”. The fastening elements are attached to the body using the puckering method, which does not distort the image of the sign and provides much higher reliability than spot welding or riveting.

The base of the road sign is made of galvanized steel with a thickness of 0.8-1mm, to increase the rigidity characteristics, the workpiece is rolled to obtain a double flange. A road sign mask made of high-quality reflective films in accordance with GOST R 52290-2004 and GOST 32945-2014 is applied to the surface of the base. Additional stiffening ribs and reinforced fastenings eliminate the possibility of the sign bending both from wind load and under the influence of any forces. To secure the road sign, the base is equipped with a special tongue-type fastening.

Indicates the location of the Gas Station. Road sign 7.3 is installed at the site. Preliminary service signs outside populated areas are installed 400-800 m, and, if necessary, 15-20 km and 60-80 km before the object, at turning points to them (intersections), if they are located away from the road. Preliminary service signs indicate the distance to the object. When indicating distances on preliminary service signs informing about objects located away from the road and installed 15-20 km, 60-80 km away, it is necessary to take into account the distance from the turn point (intersection) to the object. Preliminary service signs in populated areas can be installed 100-150 m before the object and at the turning points closest to it (intersections).

Table E.7
Dimensions in millimeters

Pickup:

Pickup from the warehouse at the address: Moscow, st. Shosseynaya, 90, building 5

Opening hours: Mon-Fri, 10:00 - 18:00

For legal entities When receiving the goods, you must have a power of attorney or stamp with you. For individuals- passport.

Delivery in Moscow and the Moscow region*:

• Delivery in Moscow within the Moscow Ring Road - 1000** rub.
• Delivery up to 10 km outside the Moscow Ring Road - 1500** rub.
• Delivery from 10 to 20 km outside the Moscow Ring Road - 2000** rub.
• Delivery from 20 to 30 km outside the Moscow Ring Road - 2500** rub.

Delivery is carried out daily, except weekends and holidays from 10:00 to 18:00.

*Orders are delivered to the entrance or to the nearest possible parking place; lifting to the floor is carried out by the customer.
**The price is for delivery of the order total mass no more than 1000 kg, no more than 4 meters long.

Delivery across Russia:

Delivery within Russia is carried out by transport companies.

Delivery to the terminals of TC "PEK", TC "GlavDostavka", "DK Transit" (IP Litovchenko) in Moscow is free. To the terminals of other transport companies (except for TC Business Lines) according to the price list for delivery in Moscow and the Moscow region.

Buildings and structures on the territory of the gas station are located in strict accordance with the project approved and agreed upon in the prescribed manner.

All types of repair and construction work on buildings and structures are carried out in strict accordance with the schedule of planned maintenance work (PMP), drawn up on the basis of local operating conditions. The settlement of foundations of buildings, structures and equipment in the first two years of their operation (after commissioning) is carefully monitored by inspection and measurements at least once every three months.

Metal structures must be inspected at least once a year, and reinforced concrete structures at least twice a year. If damage and malfunctions are detected in the structures of buildings and structures, an inspection is carried out by specialized organizations. Based on the results of the survey, measures are taken to further use the structures.

To protect against corrosion metal constructions buildings and structures must be periodically painted with protective primers, paints or varnishes (external ones - at least once a year, and those located indoors - at least once every 3-5 years).

At the gas station, a log of inspection and repair of buildings and structures is kept, in which it is necessary to record: dates and results of inspections with a description of all noticed damages, repair work performed, indicating the dates of the beginning and end of repairs, its nature and volume, results of measurements of foundation settlement, data on cracks and their location. To reduce gas pollution in residential and industrial buildings, the gas station is located on the side of the prevailing wind direction. Ventilation units production premises Gas stations are maintained in good technical condition. The operating efficiency of forced-action ventilation units is checked annually by specialized organizations, with the issuance of conclusions and a note in the passport for the ventilation unit.

The layout should exclude the possibility of an emergency fuel spill on the territory of the gas station and beyond it. At the entrance and exit from the territory, gently sloping elevated areas with a height of at least 0.2 m, or drainage trays, are installed that drain sediment contaminated with oil products to treatment facilities.

The layout provides:

Convenient access and parking of vehicles at the pump during refueling;

Good review the entire territory from the operator’s premises;

Allocation of areas for green spaces;

Sanitary and hygienic conditions for station workers;

Coordination with the general architectural composition of the microdistrict;

The minimum distances of a gas station to external objects and between its structures must comply with NPB 111-98. "Gas stations. Fire safety requirements";

The location of the gas station is indicated by a road sign;

At the entrance to the territory of the gas station, it is installed;

Road sign "restriction" maximum speed movements";

Road sign "traffic" Vehicle with dangerous goods is prohibited";

A mandatory sign “compulsory disembarkation of passengers” at gas stations is installed in the zone service;

Warning to drivers of motorized vehicles to turn off the engine 15 meters before the shopping center by installing a sign “Stopping motorized vehicles 15 meters away”;

Information board “Scheme of movement of vehicles through gas stations”;

Information board indicating the range of petroleum products sold, types of transport serviced;

At the entrances to the filling island, a “straight ahead only” sign is installed; at a gas station that has a canopy, a “height limitation” sign is installed;

Information signs about the location of a fire reservoir, water intake wells or fire hydrant.

According to requirements technical specifications Signs are installed on technological systems used at gas stations that limit the dimensions, weight and types of vehicles allowed to enter the gas station.

Information for the driver on the rules for refueling vehicles, in relation to the type of fuel dispensers, is posted in a prominent place.

Figure 1. Scheme of organization of a stationary (traditional) gas station.